About LIBERTY™ Self‑Adhering Cap Sheet
LIBERTY™ SBS Self-Adhering Roofing Systems are applied without torches, open flames, or hot asphalt, and are suitable for many primed substrates. LIBERTY™ Self-Adhering Cap Sheet is an SBS modified granule-surfaced roofing membrane designed for use with LIBERTY™ Self-Adhering Base/Ply Sheet that helps provide durable protection on low-slope areas of your property, including porches, garages, carports, and sheds.
- Self-adhering installation eliminates open flames, hot asphalt on your roof
- No need for torches, kettles, or other bulky equipment
- Reinforced construction with polyester mat coated with polymer-modified asphalt
- Minimal set-up and clean-up time helps to speed up installation as compared with typical mopped SBS roofing systems
- Installed with LIBERTY™ Self-Adhering Base/Ply Sheet as part of the LIBERTY™ SBS Self-Adhering Roofing System
- Up to a 20-year limited warranty against manufacturing defects, depending on system1
- 2-Ply LIBERTY™ SBS Self-Adhering Roofing System passes UL 2218A Class 4 impact-resistance testing
Note: Color swatches are for reference only. Always review actual product with shingles to ensure acceptable complementary match before installation on the roof.
This product can be used to comply with certain FORTIFIED Roof™ requirements. Visit gaf.com/fortified and current FORTIFIED Home™ Standard available at fortifiedhome.org for details. Applicable in the U.S. only.
![]()
Key Benefits
-
Versatile
Excellent for low-slope roof areas (½:12 - 3:12)2 such as porches, garages, carports, or sheds -
Convenient Installation
No torches, open flames, hot asphalt, bulky equipment -
Nine Popular Colors
Help complement popular Timberline® and other GAF shingle colors
1See Limited Warranty on LIBERTY™ SBS Self-Adhering Materials for complete coverage and restrictions.
2LIBERTY™ SBS Self-Adhering Roof System may be appropriate for roof sizes at or below 2,500 square feet.
The LIBERTY™ SBS self-adhering roll roofing system
GAF LIBERTY™ product warranty
**See Low-Slope Addendum to the System Plus Limited Warranty, Low-Slope Addendum to the Silver Pledge ™ Limited Warranty, and Low-Slope Addendum to the Golden Pledge® Limited Warranty for complete coverage and limitations
LIBERTY™ step-by-step installation video
Product Documentation
-
-
-
Liberty™ SBS Self-Adhering Base Ply Cap Sheet SDS - 1008C
Safety Data Sheets
-
LIBERTY™ SBS Self-Adhering Cap Sheet - RESLB117
Data Sheets
-
Liberty™ SBS Self-Adhering Installation Instructions TRILINGUAL - RESLB504
Installation Instructions and Guides
-
Ruberoid® SDS - 2244
Safety Data Sheets
LIBERTY™ SBS Self-Adhering 2-Ply Roofing System Installation — Step-by-step***
-
Step 1
Inspect the roof, and repair or replace damaged areas. -
Step 2
Apply LIBERTY™ Asphalt Primer at a rate of a 1/2 gallon per 100 sq. ft. -
Step 3
Install LIBERTY™ Self-Adhering Base/Ply. -
Step 4
Install edge flashing at all eave and rake edges, and apply LIBERTY™ Flashing Cement on exposed flange. -
Step 5
Install LIBERTY™ Self-Adhering Cap Sheet. -
Step 6
Apply LIBERTY™ Flashing Cement on end laps, on exposed sheet and set the overlap back into place when applicable. -
Step 7
Clean up by removing tools, unused materials, and other debris. Plan on inspecting roof annually if possible.
***See application instructions for complete details.